CaswellsGroup - Cutting Tools and Abrasives

SLD Laminated Surface Conditioning Discs

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £5.97 exc VAT

Back-Up Pad for SCD & SLD

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £11.50 exc VAT

DCR-R Quick Change Surface Conditioning Discs

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £0.82 exc VAT

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £19.05 exc VAT

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £10.02 exc VAT

SCXF Surface Conditioning Belts

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £3.87 exc VAT

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

NHP Hand Pads

From £1.62 exc VAT

STW Strip-It Wheels with Hole

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £5.82 exc VAT

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

Shaft for STW & STWR

From £11.77 exc VAT

SDR Strip-It Discs with Fibreglass Backing

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £10.90 exc VAT

STWR Strip-It Red Wheels with Hole

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £13.32 exc VAT

SDRR Strip-It Red Discs with Fibreglass Backing

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £16.27 exc VAT

SSWR Strip-It Red Shaft Mounted Wheels

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £12.30 exc VAT

SDCR Strip-It Red Quick Change Discs

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £20.95 exc VAT

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £19.05 exc VAT

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £10.02 exc VAT

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

Satin Finish Machines

From £457.43 exc VAT

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

Aluminium Oxide Wheels

From £70.87 exc VAT

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

Non Woven Wheels

From £75.60 exc VAT

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

Interleaf Wheels

From £84.42 exc VAT

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

Strip-it Wheels

From £136.40 exc VAT

RGB Nonwoven Wheels on 6mm Shaft

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £15.17 exc VAT

SCD Surface Conditioning Discs

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £4.25 exc VAT

Scrim back discs with hole.

Fast and heavy abrasive action, high unloading properties, extremely long life.

Recommended applications: Plastic products, machinery for the chemical and food industries (manufacture and maintenance), stainless steel furniture, the automotive and railway industries, shipbuilding, the aeronautical industry, propellers and jet engines, stainless steel structural work.

Work surfaces: Standard steel, stainless steel, aluminium, titanium and alloys, fibre glass, plastic.

A/O = Aluminium Oxide, S/C = Silicon Carbide.

Compare

Favourite

SLD Laminated Surface Conditioning Discs

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £5.97 exc VAT

Scrim back discs with hole.

Fast and heavy abrasive action, extremely long life.

Good rigidity ensures excellent flatness and uniformity.

Recommended applications: Machinery for the chemical and food industries (manufacture and maintenance), stainless steel furniture, shipbuilding and stainless steel structural work.

Work surfaces: Steel, stainless steel, aluminium, titanium alloys, fibre glass, plastic.

A/O = Aluminium Oxide, S/C =Silicon Carbide.

Compare

Favourite

Back-Up Pad for SCD & SLD

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £11.50 exc VAT

Compare

Favourite

DCR-R Quick Change Surface Conditioning Discs

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £0.82 exc VAT

Quick change surface conditioning scrim back discs with R fastening system.

Recommended for use in applications requiring considerable mechanical strength.

Extremely quick to change.

Fast and heavy abrasive action.

Can be used in hard to reach places.

Recommended applications: Plastic products, machinery for the chemical and food industries, stainless steel furniture, the automotive and railway industries, the aeronautical industry, stainless steel structural work.

Work surfaces: Steel, stainless steel, aluminium, titanium and alloys, fibre glass, plastic.

A/O = Aluminium Oxide, S/C = Silicon Carbide.

Compare

Favourite

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £19.05 exc VAT

Compare

Favourite

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £10.02 exc VAT

To fit the RH holders for DCR-R to the M14 thread of angle grinders.

Compare

Favourite

SCXF Surface Conditioning Belts

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £3.87 exc VAT

Extremely flexible, does not delaminate even if used with 3mm diameter contact wheels.

Easy to fit on very compact machinery.

Recommended applications: Cleaning parts made of stainless steel, aluminium or other metals, satin finishing small surfaces, light deburring or removing TIG or MIG weld beads on hard to reach places, cleaning marks left by previous operations and removing scale.

Work surfaces: Stainless steel, standard or alloyed steel, aluminium, titanium, non-ferrous materials and alloys, fibre glass, plastic or plastic reinforced fibre glass.

A/O = Aluminium Oxide.

Compare

Favourite

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

NHP Hand Pads

From £1.62 exc VAT

This non woven abrasive material is converted into convenient pre-cut sheets.

Can be used manually or on orbital sanders.

Extremely flexible and handy.

Excellent cutting performance and resistance to clogging.

Easy to clean using compressed air or water.

Recommended applications: Cleaning parts of irregular shape, removing scale, grease and paints. Removing marks left by previous operations.

Work surfaces: Stainless steel, standard or alloyed steel, aluminium, titanium, non-ferrous materials and alloys, fibre glass, plastic or plastic reinforced by fibre glass.

Compare

Favourite

STW Strip-It Wheels with Hole

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £5.82 exc VAT

This STRIP-IT material is cut in the shape of a disc with a hole in the centre.

They can be fitted individually or in pairs on suitable fixing shafts.

They are particularly suitable for cleaning weld beads without removing any material and without weakening the workpiece.

The work surface doubles when discs are used in pairs.

Recommended applications: Used for mechanically cleaning all types of welding, for rapidly removing scale and oxidisation, for satin finishing small surfaces, for removing paints or other clogging materials such as salt, rust, grease, oil and protective waxes.

Work surfaces: Stainless steel, standard or alloyed steel, aluminium, titanium, non-ferrous materials and alloys, fibre glass, plastic or plastic reinforced by fibre glass, stone or wood.

Compare

Favourite

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

Shaft for STW & STWR

From £11.77 exc VAT

Compare

Favourite

SDR Strip-It Discs with Fibreglass Backing

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £10.90 exc VAT

This STRIP-IT material is applied on a stiff fibre backing thus allowing it to be used on angle grinders.

They can be fitted individually or in pairs on suitable fixing shafts.

They can be used at high speeds on standard angle grinders which enables them to be used for extremely heavy scrubbing on large work surfaces.

No back up pad needed.

Recommended applications: Rapidly removing scale and oxidation, satin finishing small and large surfaces, removing paints or other clogging materials such as salt, rust, grease, oil and protective waxes.

Work surfaces: Stainless steel, standard or alloyed steel, aluminium, titanium, non-ferrous materials and alloys, fibre glass, plastic or plastic reinforced by fibre glass, stone or wood.

Compare

Favourite

STWR Strip-It Red Wheels with Hole

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £13.32 exc VAT

The Strip-It Red material is more rigid with faster cut and longer life compared to the black one.

Recommended applications: Used for mechanically cleaning all types of welding, for rapidly removing scale and oxidation, for satin finishing small surfaces, for removing paints or other clogging materials such as salt, rust grease oil and protective waxes.

Work surfaces: Stainless steel, standard or alloyed steel, aluminium, titanium, non-ferrous materials and alloys, fibre glass, plastic or plastic reinforced by fibre glass, stone or wood.

Compare

Favourite

SDRR Strip-It Red Discs with Fibreglass Backing

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £16.27 exc VAT

The Strip-It Red material is more rigid with faster cut and longer life compared to the black one.

Work surfaces: Stainless steel, standard or alloyed steel, aluminium, titanium, non-ferrous materials and alloys, fibre glass, plastic or plastic reinforced by fibre glass, stone or wood.

Compare

Favourite

SSWR Strip-It Red Shaft Mounted Wheels

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £12.30 exc VAT

The Strip-It Red material is more rigid with faster cut and longer life compared to the black one.

Work surfaces: Stainless steel, standard or alloyed steel, aluminium, titanium, non-ferrous materials and alloys, fibre glass, plastic or plastic reinforced by fibre glass, stone or wood.

Compare

Favourite

SDCR Strip-It Red Quick Change Discs

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £20.95 exc VAT

The Strip-It Red material is more rigid with faster cut and longer life compared to the black one.

Work surfaces: Stainless steel, standard or alloyed steel, aluminium, titanium, non-ferrous materials and alloys, fibre glass, plastic or plastic reinforced by fibre glass, stone or wood.

Compare

Favourite

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £19.05 exc VAT

Compare

Favourite

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £10.02 exc VAT

To fit the RH holders for DCR-R to the M14 thread of angle grinders.

Compare

Favourite

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

Satin Finish Machines

From £457.43 exc VAT

A complete system of tools that, together with suitable satin finish machines, can be ideally used in a large number of cleaning and satin finishing applications on medium and large work surfaces.

The abrasive tools for satin finish machines allow operators to work on quite large areas (from 50 to 100mm in width) with a lightweight compact machine that can be used 'freehand' even on parts already in place.

The abrasive tool is efficiently driven by means of a unique split pin system.

Recommended applications: This system can be used in a large number of applications depending on the type of abrasive tool used. These include satin finishing, light deburring and cleaning small and large surfaces, removing scale, grease and paints.

Work surfaces: Stainless steel, standard or alloyed steel, non-ferrous metals and alloys, aluminium, cast iron, titanium, plastic, paint, varnish, filler, stone or wood.

Industries served: Production and maintenance of machinery and equipment for the chemical, pharmaceutical, medical and food industries. Steel and stainless steel fittings such as cookers, extractor hoods, hobs and domestic appliances.

For more information please contact our sales office.

Compare

Favourite

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

Aluminium Oxide Wheels

From £70.87 exc VAT

Excellent combination of user friendliness and durability.

The cloth used ensures a perfect balance of flexibility and strength.

The abrasive tool is efficiently driven by means of a unique 4-split-pin system.

Recommended applications: Finishing large flat, concave or convex surfaces; grinding the inner and outer surfaces of tanks and containers. Removing and cleaning welding beads.

Work surfaces: Stainless steel, standard steel, alloyed steel, aluminium, titanium, non-ferrous materials and alloys, plastic, plastic reinforced by fibre glass, marble, stone.

Compare

Favourite

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

Non Woven Wheels

From £75.60 exc VAT

These non woven wheels offer consistent finishing quality, highly efficient ventilation, flexibility, excellent user friendliness, low noise levels and resistance to clogging.

Recommended applications: Light deburring and cleaning. Satin finishing small and large surfaces. Removing scale. Removing marks left by previous operations and re-finishing after blending, welding or satin coil moulding.

Work surfaces: Stainless steel, standard or alloyed steel, non-ferrous metals and alloys, aluminium, cast iron, titanium, plastic.

Compare

Favourite

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

Interleaf Wheels

From £84.42 exc VAT

These wheels offer better cutting performance than non woven wheels whilst ensuring high finishing quality and excellent user friendliness combined with highly efficient ventilation and low noise levels typical of non woven products.

Recommended applications: Light deburring and cleaning. Satin finishing small and large surfaces. Removing scale. Removing marks left by previous operations.

Work surfaces: Stainless steel, standard or alloyed steel, non-ferrous metals and alloys, aluminium, cast iron, titanium.

A/O = Aluminium Oxide.

Compare

Favourite

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

Strip-it Wheels

From £136.40 exc VAT

Recommended applications: Satin finishing large surfaces, rapidly removing scale, oxidation, paints or other clogging materials such as salt, rust, grease, oil and protective waxes.

Work surfaces: Stainless steel, standard or alloyed steel, aluminium, titanium, non-ferrous materials and alloys, fibre glass, plastic or plastic reinforced by fibre glass, stone or wood.

Compare

Favourite

RGB Nonwoven Wheels on 6mm Shaft

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

From £15.17 exc VAT

These shaft mounted non woven wheels offer consistent finishing quality, excellent user friendliness, highly efficient ventilation, low noise levels, resistance to clogging.

Recommended applications: Light deburring and cleaning parts of irregular shape, pipes or moulded parts. Satin finishing small surfaces. Removing scale. Removing marks left by previous operations and re-finishing after blending, welding or satin coil moulding.

Work surfaces: Stainless steel, standard or alloyed steel, non-ferrous metals and alloys, aluminium, cast iron, titanium, plastic.

A/O = Aluminium Oxide, S/C = Silicon Carbide.

Compare

Favourite