CaswellsGroup - Brand - Filarc

QUICK ORDER

0 Items (£0.00)

Quick Order

Quickly add items to your shopping cart. Add the codes and quantities below and press the 'Add to Cart' button

Product Code	Quantity
Abrasive Disc Invalid code entered
Abrasive Disc Invalid code entered
Abrasive Disc Invalid code entered
Abrasive Disc Invalid code entered
Add another row + Add to Cart +
Codes added to your basket. Not all codes could be added to your basket.

> >

Switch View

Filarc PZ6500

From £46.70 exc VAT

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

Filarc 88S

From £264.27 exc VAT

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

Filarc 76S

From £465.25 exc VAT

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

Filarc 56S

From £211.37 exc VAT

Compare

Favourite

You mustsign-inbefore you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

Filarc PZ6500

From £46.70 exc VAT

A copper coated, manganese-silicon alloyed rod for GTAW of all general engineering and structural steels

with a minimum yield strength of max 420 MPa.

The rod is usually welded with pure argon (I1) as the shielding gas.

EN ISO 636-A : W 42 3 W3Si1.

EN ISO 636-A : W3Si1.

AWS A5.18 : ER70S-6.

Compare

Favourite

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

Filarc 88S

From £264.27 exc VAT

CTOD-tested, all-positional, basic AC/DC electrode with 100% recovery for offshore fabrication.

Alloyed with max 1% Ni.

Good CVN toughness down to -60°C; CTOD tested in the AW and SR conditions.

BS4360-55F steel and similar grades.

Many approved welding procedures are available.

Use short arc.

Weave slowly when permitted.

DC+. Use DC- for root passes.

EN ISO 2560-A : E 50 6 Mn1Ni B 12 H5.

AWS A5.5 : E8016-G.

Compare

Favourite

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

Filarc 76S

From £465.25 exc VAT

CTOD-tested, all-positional, basic AC/DC electrode with 100% recovery for offshore fabrication (diameter 4.0 and 5.0 mm 115%). Alloyed with max 1%Ni.

Good CVN toughness down to -60°C.

CTOD tested in the AW and SR conditions.

BS4360-50D steel and similar grades.

Satisfactory CTOD results eliminate stress relieving for joints up to approx. 50 mm plate thickness.

Many approved welding procedures available.

Use short arc.

Weave slowly when permitted. DC+.

Use DC- for root passes.

EN ISO 2560-A : E 46 6 Mn1Ni B 32 H5.

AWS A5.5 : E7018-G.

Compare

Favourite

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

Filarc 56S

From £211.37 exc VAT

Basic, thin-coated AC/DC electrode providing excellent mechanical properties.

The electrode ensures fully penetrated root passes, even under adverse conditions.

Low moisture content coating and high resistance to moisture re-absorption.

The electrode is CTOD tested.

EN ISO 2560-A : E 42 5 B 1 2 H5.

AWS A5.1 : E7016-1.

Compare

Favourite

You must sign-in before you can add products to your favourites

Once you have up to 3 products selected, visit the comparison page to compare the information

1